Steel Manufacturing by Galiawa Group

Galiawa Group knows how important it is for you to have all the resources you need available in order to meet goals and stay on budget, and ultimately, successfully complete your project.  That is why we stay committed to expanding and upgrading our facilities and equipment so we may better serve our customers.  With one large plant in Erbil and plans to open another plant soon, we are able to efficiently handle all your needs for steel rebar and post tension cable.

Galiawa Group’s combined operational facilities extend over …..  square meters. Our delivery capacity exceeds ???t/d. To ensure a just in time service,  Galiawa owns and manages its own fleet of vehicles which has over 1000 tonnes of same day delivery capacity, servicing over  ???? customers on a monthly basis

Rebar Product

Rebar, also known as reinforcement steel and reinforcing steel, is a steel bar used in reinforced concrete and masonry structures to strengthen and hold the concrete in tension. Should you require any information for this product within the Galiawa range, please contact our customer support team

Health and Saifity

Always wear gloves and eye protection when handling and tying rebar that is rusty. Flush cuts with water or peroxide, cover and see a physician.
Tuck in shoestrings and pant legs to prevent hang-ups when walking through flatwork.

GENERAL INFORMATION


These bars are extensively used for reinforcement purposes in construction

GENERAL INFORMATION

These bars are extensively used for reinforcement purposes in construction

AVAILABILITY

·         6mm 8mm 10mm 12mm 14mm 16mm 20mm 22mm 25mm 30mm 32mm

·         6-12m or according to customer’s requirement or in coil

FEATURES

·Low carbon value: resulting in good ductility, strength and welding ability

·Superior bonding strength

· 100% welding capability

·High tensile strength: perfect for bending and re bending

·Satisfactorily malleable, minimum weight and maximum strength and suitable for both compression and tension reinforcement

BEST PRACTICES

·All jobsite employees should be trained to recognize when rebar becomes a hazard.

·Routinely pick up scrap rebar to prevent trip hazards.

·When caps are not available, bend rebar over or cap with a 2×4 “L” to protect employees from injury.

· When rebar is being hoisted “stay clear”. Rebar can easily slip out of mats and cages.

·Cover exposed rebar with the correct protective cap.

·Cap all rebar that someone could fall on.

APPLICATIONS

Ideal for applications including;

·Primary reinforcement: Used to provide resistance to support design loads.

·Secondary reinforcement: Used for durability and aesthetic purposes by providing localised resistance to limit cracking and temperature-induced stresses.

·Provide resistance to concentrated loads, spreading it through a wider area.

·Assist other steel bars in accommodating their loads by holding them in the correct position.

·External steel tie bars to constrain and reinforce masonry structures.

 

 

GENERAL INFORMATION

These bars are extensively used for reinforcement purposes in construction

AVAILABILITY

·6mm 8mm 10mm 12mm 14mm 16mm 20mm 22mm 25mm 30mm 32mm

·6-12m or according to customer’s requirement or in coil

FEATURES

·Low carbon value: resulting in good ductility, strength and welding ability

·Superior bonding strength

·100% welding capability

· High tensile strength: perfect for bending and re bending

·Satisfactorily malleable, minimum weight and maximum strength and suitable for both compression and tension reinforcement

BEST PRACTICES

·All jobsite employees should be trained to recognize when rebar becomes a hazard.

·Routinely pick up scrap rebar to prevent trip hazards.

·When caps are not available, bend rebar over or cap with a 2×4 “L” to protect employees from injury.

·When rebar is being hoisted “stay clear”. Rebar can easily slip out of mats and cages.

·Cover exposed rebar with the correct protective cap.

·Cap all rebar that someone could fall on.

APPLICATIONS

Ideal for applications including;

·Primary reinforcement: Used to provide resistance to support design loads.

·Secondary reinforcement: Used for durability and aesthetic purposes by providing localised resistance to limit cracking and temperature-induced stresses.

·Provide resistance to concentrated loads, spreading it through a wider area.

·Assist other steel bars in accommodating their loads by holding them in the correct position.

·External steel tie bars to constrain and reinforce masonry structures.